Aeroel

Laser scan micrometers

HWS.1 - Handy Wire Scanner
HWS.1 - Handy Wire Scanner

Download PDF

HWS.1 - Handy Wire Scanner is a fully portable optical micrometer for non-contact measurement of wires, cables and other similar products.

Developed by Aeroel with LED and CCD technology, it uses 2 crossed linear sensor to automatically compensate positioning errors (Patent pending).

Thanks to a powerful single chip microprocessor, the micrometer is linearized and compensated to obtain the maximum precision in the entire field of measurement, regardless of an accurate positioning of the wire.

XACTUM Single Axis Micrometers
XACTUM Single Axis Micrometers

Download PDF

The XLS (eXactum Laser Scan Micrometer) series Laser Gauges represent the latest technological development in laser scanning micrometry, featuring record performance.
With their built-in and very powerful electronics, the XLS micrometers can be used as Stand Alone, Intelligent Diameter Sensors. When programmed with a Dedicated Software and completed with external Display Units and Operator Panels, they can be the hart of Dedicated Laser Measuring and Control Systems, for the on-line control of a variety of different products.

The XLS micrometers can be directly connected to a PC, PLC or NC via standard Ethernet or RS232 or RS485 interface line. Any electronic unit equipped with such an interface can simply get accurate and fast diameter readings: the user can input the measurement data into his own programme, to perform any specific task. Thanks to this feature, the XLS gauges are ideal diameter sensors for OEM Customers, System Integrators or for large scale applications.
XACTUM Dual Axis Laser Micrometers
XACTUM Dual Axis Laser Micrometers

Download PDF

Available Micrometers: XLS40, XLS80, XLS150

The XLS (eXactum Laser Scan Micrometer) series Laser Gauges represent the latest technological development in laser scanning micrometry, featuring record performance.
With their built-in and very powerful electronics, the XLS micrometers can be used as Stand Alone, Intelligent Diameter Sensors. When programmed with a Dedicated Software and completed with external Display Units and Operator Panels, they can be the hart of Dedicated Laser Measuring and Control Systems, for the on-line control of a variety of different products.

The XLS micrometers can be directly connected to a PC, PLC or NC via standard Ethernet or RS232 or RS485 interface line. Any electronic unit equipped with such an interface can simply get accurate and fast diameter readings: the user can input the measurement data into his own programme, to perform any specific task. Thanks to this feature, the XLS gauges are ideal diameter sensors for OEM Customers, System Integrators or for large scale applications.

BARLINE
BARLINE

Available Single Axis Systems: BARLINE.X40, BARLINE.X80, BARLINE.X150

Single Axis Systems

Dual Axis Systems

BARLINE Laser Measuring Systems are particularly suitable for the diameter control of ground bars or drawn metallic tubes. Thanks to a perfect balance between straightforward operation, reliability and advanced performance, BARLINE Systems represent today’s ideal solution for process automation and quality control.
EXTRULINE
EXTRULINE

Single Axis Systems

Dual Axis Systems

EXTRULINE Laser Measuring Systems are particularly suitable for the diameter control of extruded products such as plastic tubing, sections, electric cables and other similar products.
Thanks to a perfect balance between straightforward operation and advanced performance, EXTRULINE Systems represent today’s ideal solution for extrusion automation.
GRINDLINE
GRINDLINE

Grindline Systems

Grindline+ Systems

GRINDLINE is a highly accurate and extremely flexible laser measurement system, designed specifically for measuring the diameter of parts finished by through-feed or plunge centreless grinders; it is ideal for 100% on-line control and for real-time adjustment of the grinder.
MECLAB & SUPERMECLAB
MECLAB & SUPERMECLAB

Meclab Systems

Super-Meclab Systems

MECLAB is an accurate and flexible instrument suitable for measuring the diameter of cylindrical components, shafts rubber rollers, turned or ground components, hard metal tools.
NO-VAR technology - Aeroel Exclusive: no measuring drift due to changing room temperature by programming the coefficient of thermal expansion of the part.

Ideal for off-line inspection and quality control.

MECLAB TOOLS
MECLAB TOOLS

MECLAB.T40

SUPER-MECLAB+.T40

MECLAB TOOL is a family of laser instruments to check full carbide tools and blanks, perfect to measure tools with odd or even cutting edges.
Ideal for off-line inspection and quality control.
PROFILAB
PROFILAB

Download PDF

PROFILAB measures diameters, lengths, roundness, taper and run-out of cylindrical sections, effective cutting diameter of fluted cutting tools, straightness of hard metal blanks.
Ideal for off-line inspection and quality control.
QUADRALINE
QUADRALINE

Download PDF

QUADRALINE is a Laser System designed for the on-line control of the two dimensions of extruded or rolled products featuring rectangle-like cross section. Due to its special features, Quadraline guarantees reliable and accurate measurements without the need for a tight alignment and tolerates product vibration and twisting.
TABLE-GAUGE
TABLE-GAUGE

Single Axis Systems

Dual Axis Systems

Use the Xactum Intelligent Laser Gauges as bench-top micrometers, in the Table-Gauge configuration: with no other instrument can you measure diameters so quickly, so accurately and so easily.

The XLS gauges are programmed with a dedicated software and are completed with a display unit, a remote control, fixturing to hold the part and a base-plate for bench-top use: using this “Table-Gauge” assembly you can, in a few seconds, check the diameter, roundness and the concentricity of ground or turned parts, to an accuracy that before only could be obtained in a metrology room, by using much more expensive equipment and specialized personnel.

WIRELAB
WIRELAB

Download PDF

WIRELAB is a bench top laser micrometer specially designed for off-line checking of the diameter and the ovality of drawn or extruded products.
WIRELINE
WIRELINE

Download PDF

WIRELINE is a Laser Measuring System which has been specially designed to be used on-line in the Wire Industry, to monitor the finished diameter and the ovality of drawn wire.
XPLORELINE
XPLORELINE

Single Axis Systems

Dual Axis Systems

Use the Xactum Intelligent Laser Micrometers as on-line diameter gauges, in the Xploreline configuration: with no other instrument can you measure diameters so quickly, so accuratley and so easily.

The XLS gauges are programmed with a dedicated software and are completed with a display unit and a remote control: using such a measuring “system” you can monitor the diameter on-line, measuring fast moving products very accurately, to achieve 100% check and to avoid any dimensional non-conformity.

About Aeroel

Precise diameter measuring is our job, quality assurance is our commitment

We design and manufacture high accuracy Laser Micrometers and Laser Gauges for non-contact diameter measurement and control. Suitable for on-line or off-line application, to check a number of different products, to improve process efficiency by reducing scrap and manpower, to assure dimensional consistency and product quality.

Our Mission

We want to be the Specialists in Diameter Laser Gauging Technology.

We will focus all our efforts to develop sensors and control systems featuring excellent performance, high reliability for on line work, competitive price fitting the real benefits that our Customers will get form using our products.

Taking care of specific requirements coming from various industrial areas, we will develop dedicated systems to solve recurrent problems, gathering them into "application families": in this way it will be possible to grant high quality standards at very competitive conditions.